Pyzel White Tiger (PU) Pyzel

What makes the White Tiger go?

It has a clean but stubby outline, with a very full nose and wide squash tail. There is no hip and the wide point is 1 ½” forward of the center.

The tail measurement is just slightly wider than the nose. The thickness is also concentrated forward, with a beak-nose design that helps keep the volume up under the chest area for better paddle power.

The bottom rocker is even and flowing, flat throughout the board and designed to get up on top of the water quickly, which lets you build and carry speed with ease. 

The bottom has a single/double concave running through the front 2/3s of the board which transitions into a pronounced vee/double concave in the last 1/3 through the fins and off the end of the tail. The single/double concave give the board lots of lift (think speed) while helping to let the wider design transition from rail to rail with ease. The vee running off the tail also helps the board tip over onto the rail at speed and lets you turn it up into the lip with ease.

It has a relatively flat deck that blends out into tapered rails. This keeps a lot of volume in the board while still keeping it sensitive through turns and easy to pump down the line without feeling too boaty for its volume.

We recommend you ride the White Tiger anywhere from 2-5″ shorter than your regular shortboard depending on your surfing ability, and ½ to 1″ wider and add a bit more volume than you normally ride. (JJF and Ivan both ride 5’6″ White Tigers and their normal boards are 6’0″).